*define
model	Example-1	# model name

*info
        Ray tracing in model {model} from Rayinvr
######################################################################

*setup
noapp
units	km	km

### some symbolic definitions

*define
vcont	6.0			# velocity level contoured in the model
fname	Example-1.v.in.save	# file name to save the model in when "Save" is pressed

## interactive data input

*call	load	dset:{model}-synth-0.sia
name	source-1
*call	load	dset:{model}-synth-300.sia
name	source-2

*call	table	*
x	soffset	lasttr

*call	convert
extract	1

######## Travel-time reduction and scaling for the plot

*call	trcscal	0	20000

### plot traces

*call	plot	wgva+-	up	median	1.0	20
name	trace-section			0	0

gain	0.1
setamp	rms		500	1200

offset	x	1		# (X,Y) of trace origins
trange	0	16000

*end		# remove all traces

### Generate a simple "zero-offset time" table

*call	readtab	map	table-zoffset
x	float	1
twtt	float	

argrang	x	0	1.0	300

const	
twtt	8.0

*nocall	pritab	*
table-zoffset

### Rayinvr-like model:

*call	rayinvr	gui	ps	Example-1
*incl	Example-1.igm
txin	dbas:tx.in

column	vp	100
contour	vp	6.0
zoffset	x		twtt	table-zoffset	

raycode	full	30	80	40	1	1.1
1t

#3u 1d 2u
#3.2

#3t
#3u
#1d
#2u
#raycode	full	20	60	20	2	2.1
#2u
#raycode	full	20	60	20	3	3.1
#3u
raycode	full	20	80	80	3
3t
#raycode	full	10	20	6	4
#4h

source	1	Sp1		0		forw
source	2	Sp2		300		back

summary		# print brief model summary

### Define various graphical elements

*call	graphic
backgr	=same=
foregr	=same=

palette	pal-vp1
-0.3	red		0	blue
0	white		0.3	red

#palette	pal-vp		buor			5.5	8
palette	pal-vp		gmtcopper			1	2	# 4.5	8.2
palhue	pal-vs		color	cont	2	5.	4	0.05	.95
palette	pal-raycodes	gmtjet			0	3
palette	pal-arrivals	gmtjet			0	4
palette	pal-ampl	gmtseis			-1	1 

#palproc	edit	loop			pal-vp	# add a reversed copy of itself to the palette
#palproc	edit	repeat	2		pal-vp	# repeat the palette

palproc	edit	scale			pal-vp	# scale the Vp palette by Vp in the model
vp	Example-1

#palproc	edit	hbal			pal-vp		# histogram-balance the Vp palette
#vp	accrete

line	solid	1	red		l-layers
line	solid	1	blue		l-columns
line	solid	1	cyan		l-contour
line	solid	1	blue		cells-vert
line	solid	1	yellow		cells-diag
line	solid	1	emerald		l-rays1
line	solid	1	plum		l-rays2
line	solid	1	brown		l-tau
line	solid	1	forestgreen	l-zoffset
line	solid	1	melon		line-grcalc	# line for calculated gravity anomaly 

line	solid	1	blue		ttimes-forw
line	solid	1	red		ttimes-rev
line	solid	1	yellow		ttimes-observed

fill	solid	green		velocity
fill	solid	blue		wet
fill	solid	blue		lakes

marker	star	1.0						m-sources

axis	axis-tt		bar	left
_label		T [s]
_ticks

axis	axis-grav	bar	left
_label		mGal
_ticks	

axis	axis-dist	bar	top
_label		X [km]
_ticks	

axis	axis-depth	bar	left
_label		Z [km]
_ticks	

# buttons and the corresponding commands to the ray tracer

button	button3		Reload	
Example-1	load-s	{fname}

button	button4		Save		
Example-1	save-s	{fname}

button	button5		Print		
Example-1	ps

### Create cross-section image
 
*call	image	im-section		##### plot the model and rays
1	1.	6	6
project	xy	width

range-x	-20	310
range-y	-5	60	yes

velmod	Example-1		
layers						l-layers
#cells			vert			cells-vert
#cells			diag			cells-diag
#vs			shade			pal-vs
#vp			shade			pal-vp
vp			column			l-columns
vp			contour			l-contour
sources			mark			m-sources
sources			label			Shot %d
sources			traces			source-%d	# interactive data input
rays			forward			l-rays1
#rays			reverse			l-rays2
#rays						pal-raycodes
tau			velocity		5.7
tau			line			l-tau	
depcon			line			l-zoffset

object	axis-depth
object	axis-dist

cscale	vert	0.8	-0.7	0.05	0.2	Vs	# colour bar
pal-vs

cscale	vert	0.6	-0.7	0.05	0.2	Vp	# colour bar
pal-vp

cscale	vert	-0.9	-0.7	0.05	0.2	Ray codes	# colour bar
pal-raycodes

# buttons to control modelling

object	button3
object	button4
object	button5
object	-spacer-

### Create travel-time image

*call	image	im-ttimes		##### travel times
1	1.	6	6
project	xy	width

action	timered			8.0	# travel-time reduction, initial V=8 km/s

range-x	-20	310
range-y	0	12

traces	trace-section
wiggle			line			=none=
#wiggle			fill-pos		=none=
#wiggle			fill-neg		=none=
varint						pal-ampl

ttmod	Example-1			
calculated		forward			ttimes-forw
calculated		reverse			ttimes-rev
calculated					pal-arrivals
observed		all			ttimes-observed
observed					pal-arrivals
zoffset						l-zoffset
#timeshift					5.0

cscale	vert	-0.05	0.7	0.05	0.2	Arrivals	# colour bar
pal-arrivals

object	axis-tt


### Display the interactive images

*call	gui
im-ttimes
im-section

# make axes X coordinated in all sections

layout	vert				x	zoom

dockers
otree
#otree	graph
prop